Order Right Here Today
USHA SNMP/HTTP Agent
Get $50 off any Falcon Electric product through December! Use promo code "HAPPYHOLIDAYS" during checkout
Features:
-
Internet Based Remote UPS Monitoring & Management via LAN, WAN, Internet, PDA or WAP mobile phone
-
Compatible with all Falcon SG, SSG and FN Series TM UPS Models
-
Installs in Minutes Inside the Falcon UPS * 10/100 Ethernet Connectivity
-
Communicate via HTTP, SNMP and Telnet
-
Automatic Notifications via Email or IP Trap Addresses.
-
Full Event & History Logging
-
SNMP v3 Compliance & Multi-Level & User Security
-
IPv4 and IPv6 Compliant
-
RFC1628 & USHA MIBs Supplied For Windows® & UNIX
-
Remote Shutdown Client Software Provided with Unlimited License
-
Compatible with Network Management Software (NMS)
- Optional Remote Monitoring of Temperature, Humidity, Alarm Contacts, Smoke, Vibration & Water Leak Detection * CE & FCC Compliant
Easily Installs Into Most Falcon Electric UPS Systems and Voltage Regulators
Falcon Electric’s internal USHA SNMP/HTTP
agent facilitates remote UPS monitoring and
management over any Ethernet LAN,
Enterprise Network or the Internet. Simply
install the agent board into the communications option slot of a Falcon SG, SSG or FN
Series UPS and connect it to any Ethernet
LAN. If a DHCP server is present, an IP
address will automatically be assigned and
you are ready to go. A static IP address may
also be assigned to the agent. Enter the
agent’s IP address into any network connected web browser and the USHA’s internal
remote monitoring management website is
displayed.
USHA, The Secure World-Wide
Remote UPS Management Solution
The USHA agent provides the convenience
and cost benefits of centralized remote UPS
management. Whether your company has
ten Falcon UPS units or ten thousand, they
can all easily be managed and monitored
from a single location on a single
workstation.
In addition to the HTTP web interface, the
USHA supports Simple Network Management
Protocol (SNMP), allowing the use of any
Network Management Software (NMS) with
the installation of the supplied RFC1628
compliant MIB software.
The latest SNMP v3 level security has been
incorporated. Both IPv4 and IPv6 IP
addressing and security are also supported.
Your central workstation can be automatically
notified of remote site power outages and
events by listing management workstation’s
IP trap addresses or by email.
Safely Shut Down Multiple Servers or
Workstations
Shutdown client software is supplied that
allows for the orderly remote shutdown of
multiple servers or workstations over your
network. Just install the client software, set
the shutdown delay time and enter the IP
address of the controlling UPS’s USHA agent.
Shutdown client software is provided for the
following operating systems:
:
- Windows ® 9x/NT/2000/XP/2003, Vista, Windows ® 7 & Server 2008
- SCO (OpenServer ® & UnixWare ® )
- Linux
- Novell NetWare ®
- Sun Solaris ® (SPARC and X86)
- HP UX ®
- SCO ® UNIX
- FreeBSD
All shutdown client software is shipped with
the USHA agent board and may be installed
on as many servers and workstations as
desired without any additional licensing costs.
Event & History Data Logging
The USHA agent board stores power event
and other important data in the following logs:
- UPS History Log
- UPS Extended Log
- UPS Event Log
- USHA Event Log
Unattended Event Scheduling
The USHA agent board supports the following
programmed scheduling:
- UPS Battery Test Scheduling
- Weekly UPS Shutdown & Restore Events
- Special Day UPS Shutdown & Restore Events
Optional Advanced Remote Monitoring
Devices
An optional EMD-HT remote temperature and
humidity measurment interface module may be
connected to the USHA card using the spare
RS-232 RJ45 connector. The interface module
supports connecting up to two additional
sensors. The sensor options consists of
magnetic switch contacts, smoke, water or
vibration detectors.USHA SNMP/HTTP Agent Specification
| Model Designation | USHA SNMP/HTTP Agent |
UPS Monitoring Functions
| UPS Status | On-line Mode, Bypass Mode or Alarm Mode |
| UPS Model | Falcon UPS Model Designation |
| UPS Firmware Revision | Revision |
| UPS Manufacturer | Falcon |
| Current Utility Line Voltage | AC Volts |
| Minimum Utility Line Voltage, Last 1 Minute | AC Volts |
| Maximum Utility Line Voltage, Last 1 Minute | AC Volts |
| Current Utility Frequency | Hz |
| UPS Output Voltage | AC Volts |
| UPS Output Frequency | Hz |
| UPS Output Load | % of UPS Rated Output |
| UPS Output VA | VA |
| Battery Capacity Remaining | % of Battery Capacity Remaining |
| Current UPS Battery Voltage | DC Volts |
| UPS Internal Temperature | Degrees (F or C) |
| Next Scheduled UPS Off Time | dd/mm/yyyy |
| Next Scheduled UPS On Time | dd/mm/yyyy |
| UPS Input Voltage Rating | AC Volts |
| UPS Output Voltage Rating | AC Volts |
| UPS Battery Status | OK or Failed |
| Time Since UPS was on Battery Power | Seconds |
| Battery Capacity Remaining | % |
| Current Battery Voltage Per Cell | DC Volts |
| Battery Last Replaced Date | dd/mm/yyyy |
| UPS Output Source | Normal Battery or Bypass |
| Last Alarm Condition | Day, month, year, time and description of the alarm condition |
| Number of Connected Software Clients | Integer |
UPS Programmable Functions
| UPS Over Temperature Set Point | Set in Degrees (F or C) |
| UPS Overload Set Point | Set in % of Output Capacity |
| Last Battery Replace Date | Set dd/mm/yyyy |
| UPS Shutdown Delay | Set in Seconds |
| UPS Sleep Time | Set in Minutes |
| Battery Test Command | None, Quick Test, Test Until Low Battery, Timed Test, Cancel Test, Clear Test |
| Battery Test Time | Minutes |
| Scheduled UPS Battery Test | dd/mm/yyyy and Time |
| UPS Shutdown Event Triggers | AC Fail, Low Battery, Overload, Over Battery, Scheduled |
| UPS Shutdown Event Trigger Action | Warning Only, UPS Shutdown, Client Shutdown |
| Weekly Schedule Setup | Shutdown and Restart Days and Times |
| Special Day Schedule Setup | Shutdown and Restart Days and Times |
USHA Monitoring and Programmable Functions
| USHA System Date | dd/mm/yyyy | System Name | User Text |
| USHA System Time | hh:mm:ss | System Contact | User Text |
| IP Address | IPv4 or IPv6 formats | System Location | User Text |
| Gateway Address | IPv4 or IPv6 formats | USHA Polling Rate | Seconds |
| Subnet Mast | IPv4 or IPv6 formats | USHA Baud Rate | 2400 bps |
| IP Auto Configure | IPv6 | Default Language | English or Chinese |
| Link-Local Address | IPv6 | Default Temperature Unit | °F or °C |
| Global Address | IPv6 | BOOTP/DHCP | Enable or Disable |
| Prefix Length | IPv6 | Ping Echo | Enable or Disable |
| Router Address | IPv6 | Network Upgrad (UDP 69) | Enable or Disable |
| Telnet Connection | Enable, Disable and TCP Port | SNMP Support | Enable, Disable and UDP Port |
| HTTP Support | Enable, Disable and TCP Port | SNMP Version | SNMPv1 or SNMPv3 |
| SNMP Trap Receivers | NMS IP Address, User Name, Trap Type, Severity and Description | SNMP/HTTP Access Control | NMS IP Address, Community and Access Type |
| Home Page Refresh Rate | Battery, Input, Output, Alarm & Client Groups | Wake On LAN Targets | MAC Address, Repeat and interval Times |
| Email Notification | Server, Account, Password, DNS & Time | UPnP Support | Enable or Disable |
| External Link Setup | Link Address, Text and Enable or Disable | Address Status | IPv6 |
USHA Agent Card Technical Specifications
| CPU | 16-bits AC1106 Fast Ethernet RISC Processor Phoenix Kernel |
| Memory | 2MB (1Mbit X 20) TFBGA Flash Rom 2MB (1Mbit X 20) SDRAM |
| Serial Communications | Two UART Channels, One RJ-45, one Gold Finger |
| LAN Controller | 10/100 Mbit Ethernet Controller |
| Network Connection | 10/100 TXRJ-45 Jack Connector |
| RTC | Internal Real Time Clock |
| UPS Protocol | Megatec |
| Network Protocols | SNMP Over UDP/IP, HTTP over TCP/IP, ARP, TFTP, SSH, SSL, NTP, ICMP |
| Supported MIB | UPS MIB (RFC1628), USHA MIB |
| Operating Temperature | 10°C to 40°C |
| Operating Humidity | 20-90% Non-condensing |
| Size (H x W x D) | 0.6" x 2.36" x 2.59" (15.2mm x 60mm x 65.8mm) |
| Weight | 1.41 ounces (40gms) |
| Regulatory Compliance | FCC Class B, CE Class B |