The simplified version of the Brick Wall Series Mode Protectors, the PWOM15 is a module unit. Created to be designed into original equipment, this unit has proven valuable in various applications from highway signs to data acquisition systems. By allowing an OEM to design a Brick Wall unit into their product, both the manufacturer and their customers are insured of the best in surge protection.
|Outlets Available||None, this unit has a terminal strip for connection.|
|Load Ratings||15A at 120 volts, single phase, 50-60 Hz; full load regulation 1%.|
|Endurance Test||1,000 surges of 6,000 volts, 3,000 amperes, SRV <400 volts, no failures, L-N (ground wire protection) mode, U.S. Gov't. Mode 1.|
|Limiters||Series surge reactor current limiter; cascaded, auto-tracking dual polarity voltage limiters; dual pulse inverters. Parameters optimized for switch-mode power supply protection.|
|Clamping Voltage Onset||172 volts nominal; 2 volts above peak line voltage (auto-tracking).|
|EMI/RFI Filter Response||(bi-directional, wave tracking): With 50 ohm Rg load: 3db at 5kHz; 26dB at 100kHz; 38dB at 300kHz.|
|Let-Through Slew Rate||5,000 volt/microsecond disturbance reduced to 28v/microsecond within AC power wave envelope, and less than 10v/microsecond outside the power wave envelope.|
|Maximum Applied Surge Pulse Joule Rating||Unlimited rating (due to surge current limiting) (8x20microsecond).|
|Maximum Applied Surge Pulse Voltage||6,000 volts (1.2 x 50 microseconds) (Industry Standard rating).|
|Maximum Applied Surge Pulse Current||>100,000 amperes (unlimited due to current limiting) (8 x 20 microseconds).|
|Endurance, C62.41-1991 (formerly IEEE 587) Category B3 (C1) pulses||2kv>100,000; 4kv>10,000; 6kv>1,000 (NRTL verified).|
|Dimensions||3" H x 6.25" W x 7.2" D|
Call us now at...(702) 370-2481
Or order right here on the site!